Gas Hot Water Repairs & Replacement in Ermington NSW

Rest assured there is no part of a hot water job we need to pass on to someone else. From an urgent repair to a planned replacement, the same licensed team deals with ignition and pilot faults, thermocouples, gas valves, leaking tanks and TPR or tempering valves, plus servicing of the anode, burner and TPR valve. New storage cylinders and continuous flow units are supplied and installed on natural gas or LPG, with gas line and flue upgrades included and the compliance certificate handled for you.

Rather than leaving you to wait days, our emergency hot water service is built to get a licensed gasfitter to you quickly, with same day attendance wherever the diary allows. Leaking cylinders and complete loss of hot water are the two faults we treat as most urgent. If you notice a gas smell at any point, shut the isolation valve, open a window and call us rather than trying to relight anything.

Our licensed gasfitters look after the local area and the surrounding suburbs for routine hot water servicing and repairs. For installations and larger jobs the territory stretches across the wider region, taking in outlying towns and farms. Ring with your address and you have an answer straight away.

Warranty is part of the price you are paying, so compare it as carefully as the headline price. A longer cylinder or heat exchanger warranty backed by a reputable manufacturer protects you against the single most expensive component failing. Ask how long the warranty runs, what it covers, and whether the installer’s workmanship is guaranteed separately.

When the gas valve itself begins to fail, it may not hold the pilot supply steady, so the flame weakens and goes out at random. This is harder for a homeowner to spot than a draught or a dirty jet, which is why repeated outages deserve a proper test. A gasfitter can measure what the valve is doing and advise whether to repair or replace it.

If you have inherited an older hot water system with no paperwork, it is worth having a licensed gasfitter test it and bring the records up to date. Our gasfitters are licensed and insured, and once the system has been checked we issue a compliance certificate so you have something on file. That small step protects your insurance position going forward.

Check the compliance plate or the serial number on the unit to work out its age before you decide. Most people are surprised to find their hot water unit is older than they assumed. Knowing the real age helps you judge whether a repair is a sound investment or a short reprieve.

Commissioning is a required part of every installation, not an optional extra. After the unit is connected the gasfitter pressure tests the gas line, checks the burner and ignition, sets the tempering valve to a maximum of 50 degrees Celsius at the bathroom taps, and completes the compliance certificate. Those checks are built into the few hours a standard swap takes.

Ask for the service report in writing and keep it with the unit’s paperwork, since it supports a warranty claim and shows the next owner or tenant that the system has been maintained. The report follows a service made up of a burner clean, gas pressure and ignition tests, a flue and draught check, TPR and tempering valve tests at 50 degrees Celsius, an anode check, a sediment flush or descale, and a leak and carbon monoxide test. It lists any part that is wearing out and roughly when it should be dealt with.

Manufacturer cover on the unit is tied to a correctly completed, licensed installation. Our gasfitters hold the required licence and issue the compliance certificate on every install, which is what keeps that cover valid. On top of that sits our own guarantee on the workmanship, so the pipework, flue and gas connections are backed by us.

Picture a continuous flow unit that will not fire at one tap but works at another. The unit needs a minimum water flow to switch on, so a water-saving tap or a partly closed mixer may not draw enough to trigger it. If every tap is cold, the cause is more likely gas supply, ignition or a controller fault, which your gasfitter can diagnose.

Continuous flow units are compact and wall mounted, usually fitted outside, and provide hot water for as long as the tap runs with no risk of the supply going cold. They do require adequate water pressure and can lag briefly before hot water arrives on short draws. Storage cylinders are larger, handle simultaneous demand simply, and are often the easier like-for-like swap. We assess your home and advise which set of characteristics fits it best.